Service Host Administrator Guide

Version 1.4 | Published August 14, 2019 ©

Supported Codecs

The Channel Recorder supports the following containers and codecs.

Note: If a combination of CODEC / CONTAINER / RESOLUTION is not supported, Channel Recorder floods the logs with errors. If this happens stop the recording using RECORD STOP. Please make sure that the mentioned combination are supported by consulting the tables below.

Note: Only the containers AVCINTRAMXF, DVCPROMXF, XDCAMMXF, XAVCMXF support capturing of closed captions. The closed captions must be part of SMPTE 334M CDP. The captured close caption is found in the recorded clip in the wrapper according to SMPTE 436M and in the actual MXF essence.

Note: The examples below are not exhaustive. Some parameters such as the number of audio channels have other options.

PAL Codecs

MPEG-IFrame

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

MPEG2-IFrame422

720x576

Alpha: No

Bitrate: 10-50

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC IFrame

CONFIG SET CONTAINER AVI

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

DVCAM

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

DV/DVCAM 4:2:0

720x576

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCam

CONFIG SET CONTAINER AVI

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mov

DVCAM 4:2:0

720x576

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: N/A

CC: No

No Audio

PCM:
- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCam

CONFIG SET CONTAINER MOV

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf
Panasonic P2(OP-Atom)

DVCAM 4:2:0

720x576

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC DvCam

CONFIG SET CONTAINER MXF

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

DVCPRO

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

DVCPRO 4:1:1
720x576

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz;

- 4 ch: 24 in 32bit; 48kHz;

- 8 ch: 24 in 32bit; 48kHz;

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER AVI

CONFIG SET BITRATE 25

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.avi

DVCPRO 50 4:2:2
720x576

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER AVI

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mov

DVCPRO 4:1:1
720x576

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MOV

CONFIG SET BITRATE 25

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mov

DVCPRO 50 4:2:2
720x576

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: N/A

CC: No

No Audio

PCM:
- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MOV

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf (OP1a)

DVCPRO 4:1:1
720x576

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER DVCPROMXF

CONFIG SET BITRATE 25

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "dvcpro"

SET U1 MED vtr.media.mpeg.bit_rate "25000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf (OP1a)

DVCPRO 50 4:2:2
720x576

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER DVCPROMXF

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "dvcpro"

SET U1 MED vtr.media.mpeg.bit_rate "50000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf Panasonic P2 (OP-Atom)

DVCPRO 4:1:1
720x576

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 25

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

.mxf Panasonic P2 (OP-Atom)

DVCPRO 50 4:2:2
720x576

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 50

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

XDCAM

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf XDCAM (OP1a)

D10 (IMX50) 4:2:2
720x608

Alpha: No

Bitrate: 50

Bit depth: 10

VBI: required

Timecode: required

TDIR: Yes

CC: Yes

AES3:
- 4ch: 24 in 32bit; 48kHz

- 8ch: 24 in 32bit; 48kHz

CONFIG SET CODEC XDCam

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 4

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "mpeg2"

SET U1 MED vtr.media.mpeg.bit_rate "50000000"

SET U1 MED vtr.media.audio.input.channels "4"

CUER U1

REC U1

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf XDCAM (OP1a)

D10 (IMX40) 4:2:2
720x608

Alpha: No

Bitrate: 40

Bit depth: 10

VBI: required

Timecode: required

TDIR: Yes

CC: Yes

AES3:
- 4ch: 24 in 32bit; 48kHz

- 8ch: 24 in 32bit; 48kHz

CONFIG SET CODEC XDCam

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET BITRATE 40

CONFIG SET AUDIOCHANNELS 4

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "mpeg2"

SET U1 MED vtr.media.mpeg.bit_rate "40000000"

SET U1 MED vtr.media.audio.input.channels "4"

CUER U1

REC U1

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf XDCAM (OP1a)

D10 (IMX30) 4:2:2
720x608

Alpha: No

Bitrate: 40

Bit depth: 10

VBI: required

Timecode: required

TDIR: Yes

CC: Yes

AES3:
- 4ch: 24 in 32bit; 48kHz

- 8ch: 24 in 32bit; 48kHz

CONFIG SET CODEC XDCam

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET BITRATE 40

CONFIG SET AUDIOCHANNELS 4

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "mpeg2"

SET U1 MED vtr.media.mpeg.bit_rate "30000000"

SET U1 MED vtr.media.audio.input.channels "4"

CUER U1

REC U1

NTSC Codecs

MPEG IFrame

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

MPEG2-IFrame422

720x480

Alpha: No

Bitrate: 10-50

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC IFrame

CONFIG SET CONTAINER AVI

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

DVCAM

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

DV/DVCAM 4:1:1

720x480

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCam

CONFIG SET CONTAINER AVI

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

.mov

DVCAM 4:1:1

720x480

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCam

CONFIG SET CONTAINER MOV

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

.mxf

Panasonic P2

(OP-Atom)

DVCAM 4:1:1

720x480

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: N/A

CC: No

No Audio

CONFIG SET CODEC DvCam

CONFIG SET CONTAINER MXF

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

DVCPRO

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

DVCPRO 4:1:1

720x480

Alpha: No;

Bitrate: 25;

Bit depth: 8;

VBI: N/A;

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz;

- 4 ch: 24 in 32bit; 48kHz;

- 8 ch: 24 in 32bit; 48kHz;

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER AVI

CONFIG SET AUDIOCHANNELS 8

CONFIG SET BITRATE 25

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

.avi

DVCPRO 50 4:2:2

720x480

Alpha: No;

Bitrate: 50;

Bit depth: 8;

VBI: N/A;

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER AVI

CONFIG SET AUDIOCHANNELS 8

CONFIG SET BITRATE 50

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

.mov

DVCPRO 4:1:1

720x480

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MOV

CONFIG SET AUDIOCHANNELS 8

CONFIG SET BITRATE 25

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

.mov

DVCPRO 50 4:2:2

720x480

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MOV

CONFIG SET AUDIOCHANNELS 8

CONFIG SET BITRATE 50

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

.mxf (OP1a)

DVCPRO 4:1:1

720x480

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER DVCPROMXF

CONFIG SET AUDIOCHANNELS 8

CONFIG SET BITRATE 25

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "dvcpro"

SET U1 MED vtr.media.mpeg.bit_rate "25000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf (OP1a)

DVCPRO 50 4:2:2

720x480

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER DVCPROMXF

CONFIG SET AUDIOCHANNELS 8

CONFIG SET BITRATE 50

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "dvcpro"

SET U1 MED vtr.media.mpeg.bit_rate "50000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf Panasonic P2 (OP-Atom)

DVCPRO 4:1:1

720x480

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 25

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

.mxf Panasonic P2 (OP-Atom)

DVCPRO 50 4:2:2

720x480

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 50

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type

XDCAM

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf XDCAM (OP1a)

D10 (IMX50) 4:2:2

720x512

Alpha: No

Bitrate: 50

Bit depth: 10

VBI: Required

Timecode: Required

TDIR: Yes

CC: Yes

AES3:

- 4 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC XDCam

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 4

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "mpeg2"

SET U1 MED vtr.media.mpeg.bit_rate "50000000"

SET U1 MED vtr.media.audio.input.channels "4"

CUER U1

REC U1

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf XDCAM (OP1a)

D10 (IMX40) 4:2:2

720x512

Alpha: No

Bitrate: 40

Bit depth: 10

VBI: Required

Timecode: Required

TDIR: Yes

CC: Yes

AES3:

- 4 ch: 24 in 32bit; 48kHz

- 8ch: 24 in 32bit; 48kHz

CONFIG SET CODEC XDCam

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET BITRATE 40

CONFIG SET AUDIOCHANNELS 4

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "mpeg2"

SET U1 MED vtr.media.mpeg.bit_rate "40000000"

SET U1 MED vtr.media.audio.input.channels "4"

CUER U1

REC U1

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf XDCAM (OP1a)

D10 (IMX30) 4:2:2

720x512

Alpha: No

Bitrate: 30

Bit depth: 10

VBI: Required

Timecode: Required

TDIR: Yes

CC: Yes

AES3:

- 4 ch: 24 in 32bit; 48kHz

- 8ch: 24 in 32bit; 48kHz

CONFIG SET CODEC XDCam

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET BITRATE 30

CONFIG SET AUDIOCHANNELS 4

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "mpeg2"

SET U1 MED vtr.media.mpeg.bit_rate "30000000"

SET U1 MED vtr.media.audio.input.channels "4"

CUER U1

REC U1

720p50 and 720p59.94 (60M) Codecs

MPEG-IFrame

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

MPEG2-IFrame422

1280x720

Alpha: No

Bitrate: 50-300

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC IFrame

CONFIG SET CONTAINER AVI

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

DVCPRO HD

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

DVCPRO HD

1280x720

Alpha: No

Bitrate: 100

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER AVI

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mov

DVCPRO HD

960x720

Alpha: No

Bitrate: 100

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MOV

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf (OP1a)

DVCPRO HD

960x720

Alpha: No

Bitrate: 100

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER DVCPROMXF

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "dvcpro"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf

Panasonic P2 (OP-Atom)

DVCPRO HD

960x720

Alpha: No

Bitrate: 100

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MXF

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

XDCAM HD 422

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

XDCAM HD 422

1280x720

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

No Audio

PCM:

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC XDCam

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "mpeg2-ibp-422p@hl"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

XDCAM EX HQ

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

XDCAM EX HQ

1280x720

Alpha: No

Bitrate: 35

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC XDCamEX

CONFIG SET CONTAINER XDCAMMXF

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

AVC-Intra

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

AVCIntra Class 50

960x720

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC AVCIntra50

CONFIG SET CONTAINER AVCINTRAMXF

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "avc-intra"

SET U1 MED vtr.media.mpeg.bit_rate "50000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf (OP1a)

AVCIntra Class 100

1280x720

Alpha: No

Bitrate: 100

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC AVCIntra100

CONFIG SET CONTAINER AVCINTRAMXF

CONFIG SET BITRATE 100

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "avc-intra"

SET U1 MED vtr.media.mpeg.bit_rate "100000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf Panasonic P2 (OP-Atom)

AVCIntra Class 50

960x720

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC AVCIntra50

CONFIG SET CONTAINER AVCINTRAMXF

CONFIG SET BITRATE 50

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf Panasonic P2 (OP-Atom)

AVCIntra Class 100

1280x720

Alpha: No

Bitrate: 100

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC:No

No Audio

CONFIG SET CODEC AVCIntra100

CONFIG SET CONTAINER AVCINTRAMXF

CONFIG SET BITRATE 100

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

ProRes

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mov

I-Frame 4:2:2

1280x720

Alpha: No

Bitrate: 100 (LT), 147, 220 (HQ)

Bit depth: 10

VBI: N/A

Timecode: N/A

TDIR: Yes, with .Ref file

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC ProRes

CONFIG SET CONTAINER MOV

CONFIG SET BITRATE 100

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

DNxHD

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

DNxHD (50) 120, 175

DNxHD (59.94) 145, 220

1280x720

Alpha: No

Bitrate (50): 120,175

Bitrate (59.94): 145,220

Bit depth: 8

VBI: N/A

Timecode: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER DNXHDMXF

CONFIG SET BITRATE 120

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf (OP1a)

DNxHD (50) 175x

DNxHD (59.94) 220x

1280x720

Alpha: No

Bitrate (50): 175x

Bitrate (59.94): 220x

Bit depth: 10

VBI: N/A

Timecode: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER DNXHDMXF

CONFIG SET BITRATE 175

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf Panasonic P2 (OP-Atom)

DNxHD (50) 120, 175

DNxHD (59.94) 145, 220

1280x720

Alpha: No

Bitrate (50): 120,175

Bitrate (59.94): 145,220

Bit depth: 8

VBI: N/A

Timecode: N/A

CC: No

No Audio

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 120

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf Panasonic P2 (OP-Atom)

DNxHD (50) 175x

DNxHD (59.94) 220x

1280x720

Alpha: No

Bitrate (50): 175x

Bitrate (59.94): 220x

Bit depth: 10

VBI: N/A

Timecode: N/A

CC: No

No Audio

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 175

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

1080i25 and 1080i29.97 (30M) Codecs

MPEG-IFrame

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

MPEG2-IFrame422

1920x1080

Alpha: No

Bitrate: 50-300

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC IFrame

CONFIG SET CONTAINER AVI

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

DVCPRO HD

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

DVCPRO HD (25) 1920x1080

DVCPRO HD (29.97) 1260x1080

Alpha: No

Bitrate: 100

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER AVI

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mov

DVCPRO HD (25) 1920x1080

DVCPRO HD (29.97) 1260x1080

Alpha: No

Bitrate: 100

Bit depth: 10

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MOV

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf

Panasonic P2

(OP-Atom)

DVCPRO HD (25) 1920x1080

DVCPRO HD (29.97) 1260x1080

Alpha: No

Bitrate: 100

Bit depth: 10

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER MXF

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf (OP1a)

DVCPRO HD (25) 1920x1080

DVCPRO HD (29.97) 1260x1080

Alpha: No

Bitrate: 100

Bit depth: 10

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

PCM:

- 4 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DvCPro

CONFIG SET CONTAINER DVCPROMXF

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "dvcpro"

SET U1 MED vtr.media.mpeg.bit_rate "100000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

XDCAM HD 422

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

XDCAM HD 422

1920x1080

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

No Audio

PCM:

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC XDCam

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "mpeg2-ibp-422p@hl"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

XDCAM HD LP

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

XDCAM HD LP

1440x1080

Alpha: No

Bitrate: 18

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

No Audio

PCM:

- 4 ch: 16 in 32bit; 48kHz

CONFIG SET CODEC XDCamHD

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET BITRATE 18

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

XDCAM HD SP

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

XDCAM HD SP

1440x1080

Alpha: No

Bitrate: 25

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

No Audio

PCM:

- 4 ch: 16 in 32bit; 48kHz

CONFIG SET CODEC XDCamHD

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET BITRATE 25

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

XDCAM HD HQ

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

XDCAM HD HQ

1440x1080

Alpha: No

Bitrate: 35

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

No Audio

PCM:

- 4 ch: 16 in 32bit; 48kHz

CONFIG SET CODEC XDCamHD

CONFIG SET CONTAINER XDCAMMXF

CONFIG SET BITRATE 35

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

XDCAM EX HQ

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

XDCAM EX HQ

1920x1080

Alpha: No

Bitrate: 35

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

No Audio

PCM:

- 2 ch: 16 in 32bit; 48kHz

CONFIG SET CODEC XDCamEX

CONFIG SET CONTAINER XDCAMMXF

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

AVC-Intra

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

AVCIntra Class 50

1440x1080

Alpha: No

Bitrate: 50

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC AVCIntra50

CONFIG SET CONTAINER AVCINTRAMXF

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "avc-intra"

SET U1 MED vtr.media.mpeg.bit_rate "50000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf (OP1a)

AVCIntra Class 100

1920x1080

Alpha: No

Bitrate: 100

Bit depth: 8

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC AVCIntra100

CONFIG SET CONTAINER AVCINTRAMXF

CONFIG SET BITRATE 100

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "avc-intra"

SET U1 MED vtr.media.mpeg.bit_rate "100000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf

Panasonic P2

(OP-Atom)

AVCIntra Class 50

1440x1080

Alpha: No

Bitrate: 50

Bit depth: 10

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC AVCIntra50

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 50

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf

Panasonic P2

(OP-Atom)

AVCIntra Class 100

1920x1080

Alpha: No

Bitrate: 100

Bit depth: 10

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC AVCIntra100

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 100

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

ProRes

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mov

I-Frame 4:2:2

1920x1080

Alpha: No

Bitrate: 100 (LT), 147, 220 (HQ)

Bit depth: 10

VBI: N/A

Timecode: N/A

TDIR: Yes, with .Ref file

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC ProRes

CONFIG SET CONTAINER MOV

CONFIG SET BITRATE 100

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

DNxHD

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

DNxHD (30) 120, 185

DNxHD (29.97) 145, 220

1920x1080

Alpha: No

Bitrate (50): 120,185

Bitrate (59.94): 145,220

Bit depth: 8

VBI: N/A

Timecode: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER DNXHDMXF

CONFIG SET BITRATE 120

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf (OP1a)

DNxHD (30) 185x

DNxHD (29.97) 220x

1920x1080

Alpha: No

Bitrate (50): 185x

Bitrate (59.94): 220x

Bit depth: 10

VBI: N/A

Timecode: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER DNXHDMXF

CONFIG SET BITRATE 185

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf Panasonic P2 (OP-Atom)

DNxHD (30) 120, 185

DNxHD (29.97) 145, 220

1920x1080

Alpha: No

Bitrate (50): 120,185

Bitrate (59.94): 145,220

Bit depth: 8

VBI: N/A

Timecode: N/A

CC: No

No Audio

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 120

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf Panasonic P2 (OP-Atom)

DNxHD (30) 185x

DNxHD (29.97) 220x

1920x1080

Alpha: No

Bitrate (50): 185x

Bitrate (59.94): 220x

Bit depth: 10

VBI: N/A

Timecode: N/A

CC: No

No Audio

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 185

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

1080p50 and 1080p59.94 (60M) Codecs

AVC-Intra

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

AVCIntra Class 50

1440x1080

Alpha: No

Bitrate: 50

Bit depth: 10

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC AVCIntra50

CONFIG SET CONTAINER AVCINTRAMXF

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "avc-intra"

SET U1 MED vtr.media.mpeg.bit_rate "50000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf (OP1a)

AVCIntra Class 100

1920x1080

Alpha: No

Bitrate: 100

Bit depth: 10

VBI: N/A

Timecode: Yes

TDIR: Yes

CC: Yes

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC AVCIntra100

CONFIG SET CONTAINER AVCINTRAMXF

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

UADD CS_ENCODER1 * SHAR dart

SET U1 MED vtr.media.video.input.compression.type "avc-intra"

SET U1 MED vtr.media.mpeg.bit_rate "100000000"

SET U1 MED vtr.media.audio.input.channels "8"

CUER U1

REC U1

.mxf

Panasonic P2

(OP-Atom)

AVCIntra Class 50

1440x1080

Alpha: No

Bitrate: 100

Bit depth: 10

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC AVCIntra50

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 50

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf

Panasonic P2

(OP-Atom)

AVCIntra Class 100

1920x1080

Alpha: No

Bitrate: 100

Bit depth: 10

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

CONFIG SET CODEC AVCIntra100

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 100

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

MPEG-IFrame

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.avi

MPEG2-IFrame422

1920x1080

Alpha: No

Bitrate: 50-300

Bit depth: 8

VBI: N/A

Timecode: N/A

TDIR: Yes

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC IFrame

CONFIG SET CONTAINER AVI

CONFIG SET BITRATE 50

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

ProRes

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mov

I-Frame 4:2:2

1920x1080

Alpha: No

Bitrate: 100 (LT), 147, 220 (HQ)

Bit depth: 8, 10

VBI: N/A

Timecode: N/A

TDIR: Yes, with .Ref file

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC ProRes

CONFIG SET CONTAINER MOV

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

DNxHD

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

DNxHD (50) 240, 365

DNxHD (59.94) 290, 440

1920x1080

Alpha: No

Bitrate (50): 240, 365

Bitrate (59.94): 290, 440

Bit depth: 8

VBI: N/A

Timecode: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER DNXHDMXF

CONFIG SET BITRATE 240

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf (OP1a)

DNxHD (50) 365x

DNxHD (59.94) 440x

1920x1080

Alpha: No

Bitrate (50): 365 x

Bitrate (59.94): 440x

Bit depth: 10

VBI: N/A

Timecode: N/A

CC: No

No Audio

PCM:

- 2 ch: 24 in 32bit; 48kHz

- 4 ch: 24 in 32bit; 48kHz

- 8 ch: 24 in 32bit; 48kHz

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER DNXHDMXF

CONFIG SET BITRATE 365

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf Panasonic P2 (OP-Atom)

DNxHD (50) 240, 365

DNxHD (59.94) 290, 440

1920x1080

Alpha: No

Bitrate (50): 240 , 365

Bitrate (59.94): 290 , 440

Bit depth: 8

VBI: N/A

Timecode: N/A

CC: No

No Audio

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 240

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

.mxf Panasonic P2 (OP-Atom)

DNxHD (50) 365x

DNxHD (59.94) 440x

1920x1080

Alpha: No

Bitrate (50): 365 x

Bitrate (59.94): 440x

Bit depth: 10

VBI: N/A

Timecode: N/A

CC: No

No Audio

CONFIG SET CODEC DNxHD

CONFIG SET CONTAINER MXF

CONFIG SET BITRATE 365

CONFIG SET AUDIOCHANNELS 8

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

2160p50 and 2160p59.94 (60M) Codecs

XAVC

Container

Codec

Features

Audio

VizSend Example

MVCP Example

.mxf (OP1a)

XAVC

Alpha: No

Bitrate: 300, 480, (VBR/CBR)

Bit depth: 10

VBI: N/A

Timecode: Yes

TDIR: N/A

CC: Yes

HDR: Yes

PCM:

- 16 ch: 24 in 32bit; 48kHz

CONFIG SET CODEC XAVC

CONFIG SET CONTAINER XAVCMXF

CONFIG SET BITRATE 300

RECORD CLIP clip

RECORD START

Specifying this codec / container combination is not supported through MVCP.

If this codec / container combination is required then the web interface can be used to configure Channel Recorder. When sending MVCP commands, however, the codec / container must not be specified via vtr.media.video.input.compression.type.

Note: A M264 board is required for recording UHD.