Viz Mosart User Guide

Version 5.7 | Published May 15, 2024 ©

Introduction

images/download/attachments/140805004/introduction_product-page-mosart.png

Viz Mosart enables preprogramming of all studio operations required during a show. Preprogramming reduces the risk of manual errors and enables production quality to be focused upstream, before the event goes on air.

Viz Mosart supports two types of production:

Live Production Mode

  • Viz Mosart controls the devices in the gallery that previously were operated manually. Where previously production staff in a live show had to work a vision mixer, an audio mixer, cue video recordings, these tasks can now be programmed in advance.
    For example, Viz Mosart can be instructed to send commands to the vision mixer for switching from a camera to a video clip, whilst fading down the presenter mic.

  • Studio equipment and content cuing instructions are created by the show producer on Viz Mosart templates.

  • There are several Viz mosart template types, each corresponding to a specific studio operation.
    For example, commands to the audio mixer like, "Pull the studio microphone faders down" belong to the Camera template (this operation must be performed during the time this camera is in use), whilst simultaneously "Pull the video server faders up", belongs to the video clip Package template (as the clip must be faded-in on the desired channel). These two actions remove sound from the studio (news presenter's mic) and enable sound from the video server only (audio on the video clip).

  • An NRCS (for example, iNEWS, ENPS or OpenMedia) is the principle method of scheduling the set of Viz Mosart templates that contain commands for controlling the on-air production.
    From the NRCS, a journalist writing a story can quickly create an entire ready-to-air news story by inserting (drag and drop) Viz Mosart templates as grommets into their story.

  • The Viz Mosart GUI displays the NRCS story as one of a series of story rows, in a rundown.

  • Viz Mosart can receive continuous updates from the NRCS (however, Viz Mosart can never update the NRCS), enabling last-minute changes to a scheduled story.

  • Once the NRCS stories are loaded in the rundown, each time the Viz Mosart operator hits Take Next, commands in story elements that were created in the NRCS, direct what is placed on air.

Story Recorder Mode

Viz Mosart enables frame-accurate recording of a Viz Mosart-driven show.

  • Once the rundown is finalized, this operating mode provides all the benefits of a template-based Live Production, and also offers the producer the ability to pause the ongoing recording, go back to a known point in the show, and retake.

  • With any desired improvements retaken, once the show is completed, a final show clip is automatically stitched together for future playout.

For more details, refer to the topic Story Recorder Mode.

Related Documents

  • Viz Mosart Administrator Guide: How to install and configure software and hardware in a Viz Mosart system.

For more information about all of the Vizrt products, visit:

Feedback and Suggestions

We encourage suggestions and feedback about our products and documentation. To give feedback and/or suggestions, please contact your local Vizrt customer support team at www.vizrt.com.