Gateway Administrator Guide

Version 5.2 | Published March 01, 2019 ©

Start, Stop and Restart Gateway buttons

Depending on the current run status you can use the buttons in the lower left corner of the interface to Start, Restart or Stop the Gateway.

When Gateway is running, the following buttons are visible and enabled:

images/download/attachments/29298155/userinterface_startrestart.png
When Gateway is stopped, the following button is visible and enabled:

images/download/attachments/29298155/userinterface_startgw.png

Starting Gateway

Start the Gateway Client when it is stopped.

  1. To Start Gateway, click Start

    images/download/attachments/29298155/userinterface_startgwbutton.png

  2. A message appears in the messages area confirming that Gateway has started

    images/download/attachments/29298155/userinterface_gwconfirmstart.png

Stopping Gateway

Stop the Gateway Client when it is running.

  1. To stop Gateway, click Stop

    images/download/attachments/29298155/userinterface_stopgateway.png

  2. A message appears in the messages area confirming that Gateway has stopped

    images/download/attachments/29298155/userinterface_stopconfirm.png

Restarting Gateway

Restart the Gateway client when it is running.

Note:

Refreshing the browser will not restart Gateway; it will only reload the page.

  1. Click Restart

  2. You will receive a message that Gateway is stopping, followed immediately by another message that Gateway is initializing again.
    images/download/attachments/29298155/userinterface_initialstop.png

    Tip:

    Please keep in mind that changing some Gateway configuration settings requires a restart in order for the changes to take effect.